Manufacturing & Materials

??
? FLEX/RIGID-FLEX RIGID/DAUGHTERCARD? BACKPLANES?
Parameter Standard Advanced Standard Advanced Standard Advanced
Layer Count (aspect ratio driver) 22 32+ 22 32+ 52 52+
Minimum Drill Hole Size (mechanical) (mils)?(aspect ratio dependent) 9.8 7.9 9.8 7.9 9.8 7.9
Minimum Drill Hole Size (laser) (mils)?(aspect ratio dependent) .250 .250 .250 .250 .250 .250
Finished Hole Tolerance (Plated) (mils) .003 .002 .003 .002 .003 .002
Finished Hole Tolerance (Non-Plated) (mils) .002 .001 .002 .001 .002 .001
Drill Pad (Innerlayer) (mils) DHS+14 DHS+12 DHS+12 DHS+10 DHS+12 DHS+12
Antipad (mils) DHS+16 DHS+14 DHS+14 DHS+12 DHS+14 DHS+12
Backdrill Drill Size (mils) DHS+10 DHS+7? DHS+10 DHS+7 DHS+10 DHS+7
Production Backdrill Max Stub Length (mils) (design dependent) 20 (+/-5)? 14 (+/-2) 12 (+/-5) 10 (+/-2) 12 (+/-5)? 10 (+/-2)
Precision Backdrill?Max Stub Length (mils)? N/A? 10 +/- 1 N/A 6 +/- 1 N/A 6 +/- 1
Aspect Ratio (drill in mils)?Finished Hole Requirement 10:1@7.9 14:1@9.8 7:1@7.9 14:1@7.9 17:1@15.7? 22:1@15.7?
High Temperature Lamination(LCP, Dupont TK, etc.) Yes Yes Yes Yes Yes Yes
Maximum Panel Size (inches) 24 x 36 Custom sizes up to 24 x 54 24 x 36 24 x 54 24 x 54 36 x 42
Thickness (mils)?(aspect ratio dependent) 200 250+ 150 200+ 150 440+
Finished Thickness Tolerance +/-10% +/-10% ?+/-10% +/-10% +/-10% +/-10%
Copper Weights (Oz. sq/ft) 1/2 Oz. - 2 Oz. 1/8 Oz. - 10 Oz. 1/2 Oz. - 2 Oz. 1/8 Oz. - 5 Oz. 1/2 Oz. - 2 Oz. 1/8 Oz. - 5 Oz.
Minimum Core Thickness (mils) .002 .001 .005 .004 .005 .004
Top/Bottom Layer Registration (mils)
LDI
+/-1 +/-1 +/-1 ?+/-1 ?+/-1 +/-1?
Top/Bottom Layer Registration (mils)?Conventional +/-3 +/-3 +/-3 +/-3 +/-3 +/-3
Innerlayer Line Width/Space (1/2 oz) (mils) 4/4 3/3 4/4 3/3 4/4 3/3
Innerlayer Line Width/Space Tolerance (1/2oz) +/-0.5mil +/-.25 mil +/-0.5mil +/-.25 mil +/-0.5mil +/-.25 mil
Impedance Tolerance +/-10% +/-5% +/-10% +/-5% +/-10% +/-5%
? All Types?
Materials Dupont Pyralux, Hitachi, Doosan, Panasonic, Isola, Arlon, Rogers, Taconic, Nelco, Ventec, ITEQ, GETEK, Others As Required?
UL Materials, Multiple Construction/Types Approved
Surface Finishes All Finishes Supported: Tin/Lead (Reflow & HASL), ENIG, ENEPIG, Electrolytic Nickel/Gold (Hard & Soft),
Immersion Tin, Immersion Silver, OSP, SMOBC
?Via Types Thru, Blind, Buried, Micro, Conductive/Non-Conductive Filled?
Impedance Types Microstrip, Stripline, Coplanar Waveguide
Image Process LDI, Large Format, Boobinder
Cross-Section & Lab Standard/Thermal Stress XS Evaluation, Structural Configuration & Integrity Analysis, Thermal Shock Chamber, Scanning Electron Microscope
Electrical Test All levels supported (I, II, III, IV), insertion loss/signal integrity, impedance, hi-pot, resistance, continuity, isolation, bareboard, assembly
Certifications/Accreditations AS9100, NADCAP, MIL-PRF-31032, MIL-P-50884, MIL-P-55110, IPC-6012/6013/6018, IPC-A-600, IPC-A-610, J-STD-001, ITAR Registered, UL
Full Design Service Cadence Allegro, Mentor Graphics Expedition, Routing/Layout, Component Placement, Assembly,
Schematic Creation, Full Documentation Packages, Mechanical & Electrical Modeling/Simulation
?Connectors In addition to Amphenol's full catalog of connector products, Amphenol Printed Circuits offers three unique connector products: UHD (Ultra High Density), NAFI, Viper
?Assembly Full turn-key, thru hole, press fit, crimp, SMT/BGA, Wire-Bond, RoHS compliant, potting, conformal coating, Parylene coating
  • 91 Northeastern Blvd
    ? ? Nashua, NH 03062
  • (603) 324-4500
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Send Us A Message

  Mail is not sent.   Your email has been sent.
We use cookies to improve our website. By continuing to use this website, you are giving consent to cookies being used. Cookie policy. I accept cookies from this site. Agree
开心激情_婷婷五月丁香_日韩av在线